SlurrySep is a proprietary blend of bentonite clay, polymers and pH reducing acids is designed for treatment of concrete slurry. Results are dramatic as solids quickly separate and condense on the bottom, leaving clean water for reuse or compliant discharge.
1. Blend 1-2 lbs per 200 gallons. SlurrySep into slurry and mix consistently for 5-10 minuets to allow clay and polymer to fully hydrate.
2. Allow floc to settle. Additional mixing can help floc form larger particle size and cleaner water.
3. The floc if fully formed, it is ready for dewatering by decanting or pumping into dewatering filter bag.
4. Excess solids are now prepared for SlurryDry solidification.
SlurrySep Clay Based Separating Agents
Wastewaters contain a mixture of solids (both suspended and colloidal), dissolved metals and organic compounds. While there are many options available to remove these contaminants, most involve multiple steps and a considerable amount of time for the process.
The traditional approach to pre-treating waste streams for discharge or re-use typically involved:
SlurrySep eliminates these laborious, multi-step processes. All SlurrySep formulas are a non-hazardous blend of sodium bentonite clay, minerals and other proprietary resources. SlurrySep offers generators of various waste streams a safe, simple, and cost-effective means for pre-treatment and disposal. In addition, SlurrySep eliminates the need for handling and storing liquid chemicals used in traditional waste water treatment systems.
SlurrySep process can be described as follows:
Decrease Process Time